Pitts S-1 Special

Aerotek Pitts S-1T Special N196JR
Aerotek Pitts S-1T Special N196JR

Small and powerful with extremely high performance, particularly with respect to both aileron-roll rate and snap-roll rate. The Pitts Special S-1 is regularly used in all competition categories in both national and world contests.

Developing nation: United States of America
Manufacturer: Aviat Aircraft Inc..
Designer: Curtiss Pitts
Production line: Afton, Wyoming USA.
Type aircraft: Special aerobatic biplane.
First flight: September 1944.
Cockpit: one seat.
Wing span upper: 5,3 m.
Wing span lower: 5,3 m.
Wing area: 9,15 m².
Fuselage length: 4,72 m.
Height: 1,92 m.
Engines: one Lycoming IO-360-B4A rated 134 KW.
Weight: 326 Kg.
Fuel: fuselage tank capacity 90 liters.
wing tank capacity 110 liters.
Max. take off weight: 521,6 Kg.
Cruise speed: 263 km/h.
Max. speed: 283 km/h.
Max rate of roll: 400 °/sec.
G-limits: 6 G/-5 G.
Ceiling: 6.797 m.
Range: 507 km.
Performance: max. rate of climb at sea level 815 m per minute.
Pitts Specials

  • All single seat (S1n) and two seat (S2n) are high performance biplanes with variations of a design that started in 1944. The design was popularized by Betty Skelton, Caro Bayley, and other performers, which lead to the offering of plans around 1960.
  • S-1C = Plans built aircraft, flat bottom wing, two aileron, single seat engine was normally anything from an 62.5 kW continental to a 132 kW Lycoming, fixed pitch prop.
  • S-1D = Just an S-1C but with 4 ailerons.
  • S-1E Like S1-S, but homebuilt (E for Experimental) symmetrical wing.
  • S-1S = 132 – 147+ kW, single seat, factory or homebuilt, symmetrical wing, 4 ailerons, fixed pitch prop.
  • S-1T = 147 kW Lycoming AEIO-360, 4 aileron, single seat, factory built, symmetrical wing, constant speed 2 blade Hartzell prop.
  • S-1-11B = 220+ kW Lycoming, 4 aileron, single seat, experimental-plans or factory built and factory component parts, symmetric airfoil, 3 blade constant speed prop rolls better than 400 degree/s, climbs better than 1.220 m/min.
  • S-2A = 147 kW Lycoming, 4 aileron, 2 seat, factory built, symmetrical airfoil, constant speed 2 blade Hartzell prop.
  • S-2B = 191 kW Lycoming, 4 aileron, 2 seat (larger fuselage than S2-A), factory built, symmetric airfoil, constant speed 2 blade Hartzell prop with options for a 3 blade MT or 3 blade Hartzell composite prop.
  • S-2C = 191 kW Lycoming, 4 aileron, 2 seat, factory built, symmetric airfoil, constant speed 3 blade prop , current production model. Improved version of S-2B, with improved ailerons and rudder.
  • S-2E = basically a kit built S-2A (maybe a few plans built).
  • S-2S = 191 kW Lycoming IO540, 4 aileron, single seat, factory built, symmetrical wing, constant speed prop, 2 blade Hartzell prop…derivative of the S-2A, factory built, often used by airshow performers such as Jim LeRoy of Bulldog Airshows.
  • Model 12 – 264 kW M14P Russian radial engine, 2-blade or 3 blade MT propeller, plans built, component parts available. Developed by Jim Kimball Enterprises  in Florida.
  • Model 13 – a “coupe” type monoplane design. It was never built.
  • Model 14 – A new design being built by Steen Aero Lab  Two-place, 294 kW M14.
  • Model 15 – Reported as a light sport type monoplane aircraft being developed by Steen Aero Lab.

Be the first to comment

Leave a Reply

Your email address will not be published.


*


twenty + fifteen =

This site uses Akismet to reduce spam. Learn how your comment data is processed.